Singularity reservoir mounts in stock

sINGULARITY BLOGjpg

ABOUT SINGULARITY COMPUTERS

We have worked with Daniel from Singularity Computers for a few years now so it was great to see him moving out of the custom rig building box and into part production, these reservoir mounts are some of the best in the world and will really make your system pop! I’ll let the man himself tell you about them.
The Ethereal series are built from billet alloy which means it has been CNC Milled from a solid piece of alloy. It is sand blasted and anodized in a selection of colours. Anodizing creates a surface which is part of the metal itself so it is incredibly durable. This is a product you will be able to use in many future builds. This mount fits a 60mm reservoir which means that it is compatible with EK, Bitspower Alphacool, etc.

So no more plastic clips and they are available in pretty much any colour you could use for a build this could really give your next rig the little bit of class you’re looking for!

SHOP SINGULARITY MOUNTS NOW

 

We are live!

Untitled-3-Recovered

5 years ago I started this little side job making a few custom parts for people’s computers in my spare time, since then we kick-started the hardline tubing revolution in 2012 and recently brought the world cable combs! All of this has brought E22 worldwide recognition as a forward thinking company always looking to give customers something new and exciting but really we just love playing in the workshop making new things.
So 5 years have past with the same old clunky webstore and as we were browsing the admin section fixing yet another bug it dawned on us that it was about time for a change something fresh and clean that just works. That was around a month ago and since then we have been hard at work behind the scenes bringing the new E22 to life!
What you can expect now compared to the past 5 years?

A smoother shopping experience We are now running on the wordpress platform allowing us to tweak and change site content where needed easily without causing any disruption. Plus no more cart timeouts! ‘yay’

The weekly competition This is a way for me to say a big thankyou to everyone that has supported E22 over years, no matter what your order size was it all went into making this company what it is today!

Faster & cheaper shipping One of the benefits we have seen since business has increased is the ability to reduce shipping costs and increase our workforce to get orders out quicker. All EU orders are now sent tracked via Royal mail for the same cost as before and as an added bonus over £50 will now receive free shipping!

 

There are loads more improvments being made behind the scenes so have a look around and enjoy the new and improved E22.BIZ

 

Nate George 🙂

K2 MK2 Project Log

K2 Blog Thumb

Check out the log of how MK1 was created in just 5 days!


Back in August I was invited to head over to Berlin for the campus party, as soon as I found out I knew that I needed a new case to take with me!

In the end I had around 5 days to finish to go from 3D concept to full working model. While it was a massive push, in the end it was a success and K2 embarked on a mammoth journey from Bristol to Berlin via coach.
The initial 3D K2 concept Simple in essence, cooled by a single radiator drawing air through an open finned design.
Tool paths to guide the CNC were created, here you can see the sheet layout for the bottom fins.
Using a 3mm single fluted end mill the CNC makes quick work of what would be huge manual task.
Once milled and painted each fin was threaded onto two M4 rails using some nickel plated 8mm spacers.
With the top and bottom fins all in place the main door is assembled.
Fittings were added to the freshly painted slimline 240mm radiator.
For the bottom section a sheet of 2mm aluminium was milled and bent. Here I’m test fitting the 120mm fans using some M4 dome nuts to hold them in place.
To bridge the gap between the front panel and to hold the audio ports a block of cast plexi get attacked with the 6mm end mill.
The middle section was milled from two pieces of 10mm clear plexi and then topped with some 1.5mm aluminum.
Everything done, the case was assembled and leak tested before heading off to Berlin.
The 10mm thick clear plexi fan spacer glowing from natural light.
K2 arrived in Berlin fine and after chatting with some of the other great European modders we set up the machines and prepped for an awesome week.
Well that is it, all finished in 5 days! a fantastic week in Germany and some brilliant memories. All that is left is to enjoy these final eye candy shots of MK1 🙂

 

 

Fan Grills now available in colours!

Grills blog

We have been doing our small selection of fan and radiator grills for years in stainless steel but after taking our own laser into the workshop we decided to move over to acrylic. This now means that all the great designs that you guys and girls have come to love are now available in every colour you could think of to match your build!

SHOP GRILLS NOW